Product Showcase

  1. High Power SPDT Reflective Switch For 1 GHz – 1.1 GHz Applications: CMSW-SPDTR-1G-5K
    1/17/2018

    The new CMSW-SPDTR-1G-5K from Corry Micronics is a single-pole double-throw (SPDT) hermetically sealed reflective switch designed for operation in applications from 1 GHz to 1.1 GHz at 100 W average input power. It features peak power handling at 5kW for a 17 uS/2% duty cycle pulse.

  2. LTE Universal Multi-Band Front-End Module For IoT: SKY68001-31
    1/17/2018

    Skyworks offers the new SKY68001-31 LTE universal multi-band front-end module made for cellular IoT modem devices targeting LPWAN, LTE universal modem products operating in low-band B5/B8/B12/B13/B17/B18/B19/B20/B26 and mid-band B1/B2/B3/B4/B25/B39/B66 frequencies, and PAE optimized for Class 3 LTE output power. The cost-optimized module features a low-loss post-PA transmit front end for enhanced efficiency, a broadband PA supporting APT mode of operation or Vcc fixed supply, and integrated low-pass filters for harmonic rejection.

  3. 100 Watt CW, 100 kHz - 1000 MHz Solid-State Amplifier: Model 100U1000
    1/11/2018

    AR offers the Model 100U1000 self-contained, air-cooled, broadband, solid-state amplifier ideal for applications where instantaneous bandwidth and high gain and linearity are required. When used with an RF sweep generator, this amplifier will nominally provide over 100 watts of power. The device is also protected from RF input overdrive by an RF input leveling circuit which controls the RF input level to the RF amplifier first stage when the RF input level is increased above 0 dBm.

  4. 2 GHz To 5 GHz Front-End Modules For 802.11ax WLAN Applications
    1/8/2018

    Skyworks offers four new front end modules operating in frequencies from 2 GHz to 5 GHz. They are designed to provide full functionality of a fully matched power amplifier (PA), power detector, harmonic filter, and low-noise amplifier (LNA). They are ideal for networking and personal computing systems, PC cards, PCMCIA cards, mini-cards, half mini-cards, and WLAN-enabled wireless video systems.

  5. 5 GHz WLAN Front-End Module (FEM): SKY85755-11
    1/5/2018

    The SKY85755-11 is a 5 GHz WLAN Front-End Module (FEM) that is highly integrated and ideal for 802.11ax networking and personal computing systems, PC cards, PCMCIA cards, mini-cards, half mini-cards, and WLAN-enabled wireless video systems.

  6. 5 GHz WLAN Front-End Module (FEM): SKY85743-21
    1/5/2018

    The SKY85743-21 is a 5 GHz WLAN Front-End Module (FEM) that is highly integrated and ideal for indoor and outdoor 802.11ax networking systems, and WLAN-enabled wireless video streaming systems.

  7. 2.4 GHz 1024 QAM WLAN Front-End Module: SKY85337-11
    1/5/2018

    Skyworks offers the SKY85337-11 highly-integrated, 2.4 GHz front-end module providing the functionality of a fully matched power amplifier (PA), power detector, harmonic filter, low-noise amplifier (LNA), and a single-pole, double-throw (SPDT) switch. The module is ideal for 802.11 ac set-top boxes, networking, personal computer systems, and WLAN enabled wireless video systems.

  8. 2 GHz Front-End Module: SKY85331-11
    1/5/2018

    The SKY85331-11 is a fully matched front-end module (FEM) that integrates 2 GHz single-pole, double-throw (SPDT) transmit/receive (T/R) switch, a 2 GHz low-noise amplifier (LNA) with bypass, and a 2 GHz power amplifier (PA). It is ideally suited for 802.11ac networking and personal computing systems, PC cards, and WLAN-enables wireless video systems.

  9. High Power RF Amplifiers For Communications Applications
    1/4/2018

    Corry Micronics offers a series of high power RF amplifiers operating in frequencies ranging from 869 GHz to 2170 GHz, and with nominal output power of 32 W or 45 W. Signal types include GSM, LTE, and UMTS models. Control and monitoring features are available.

  10. LTE B3/B7 BAW Diplexer (75 MHz/70 MHz): QPQ1237
    12/28/2017

    Qorvo’s QPQ1237 is a high performance bulk acoustic wave (BAW) Diplexer specifically designed for Band 3 uplink and Band 7 uplink applications. Features include low insertion loss, high rejection, high attenuation, and a RoHS compliant 3.00 mm x 3.00 mm x 0.91 mm surface mount packaging.